BETONWASH is the definitive solution for reclamation of excess concrete and slurry water from cleaning of trucks, pumps, mixer, buckets, etc.
It separates solid materials over 0.15 mm diameter from the water through a spiral system rotating inside the inclined drum.
Slurry water is discharged from the BETONWASH by overflow into storage tanks and can be reused in the production of concrete or pumped into the WATERWASH.
Some advantages that make the BETONWASH the best choice are:
1. The process begins with the mixer or truck washout.
2. Extra concrete is diluted with clean water through pipes
3. The diluted concrete is discharged into the hopper, equipped with conveying pipes
4. BETONWASH works automatically until the complete extraction of aggregates (up to 0.15 mm)
5. The system periodically starts the agitator to avoid the settlement of fine materials
6. Slurry water is received from the WATERWASH from a specific deposit tank
7. WATERWASH separates water from concrete generating a “cake” of aggregates that can be reused in the concrete production
8. Clean water can be reused in the plant for site activity
9. A PH adjustment is available to check water conditions
| Model | 1.0 Basic | 2.0 Basic | 1.0 Ready2Use | 2.0 Ready2Use |
| Maximum wash-out (normal concrete m3/h) | 11 | 25 | 11 | 25 |
| Maximum wash-out (normal mortar m3/h) | 4 | 8 | 4 | 8 |
| Separation of solids down to (mm) | 0,15 | 0,15 | 0,15 | 0,15 |
| Maxim size of aggregates (mm) | 50 | 50 | 50 | 50 |
| Pressure required for clear water (bar) | 2 | 2 | 2 | 2 |
| Number of vehicles per hour (n) | 6 | 12 | 6 | 12 |
| Maximum number of discharge vehicles (n) | 1 | 2 | 1 | 2 |
| Dimensionins of standard discharge hopper (m) | 1,8x1,8 | 1,4x6,0 | 1,8x1,8 | 1,4x6,0 |
| Power for motor of separator (kW) | 5,5 | 11 | 5,5 | 11 |
| Power for clean water pump (if required kW) | 2,2 | 2,2 | 2,2 | 2,2 |
| Slurry water storage tank (m3) | - | - | 15 | 15+15 |